Welcome to our New Forums!

Our forums have been upgraded and expanded!

Welcome to Our New Forums

  • Our forums have been upgraded! You can read about this HERE

My thread

One Wire Phenomenon

New member
Joined
Oct 21, 2020
Messages
2,149
Ok this is going to be my thread where I post about things that might or might not be relevant or important to people.

Im learning as I go and enjoying things I find and sharing it please anyone feel free to reply and help out with stuff it helps me and maybe some things will help others aswell.

I might not always be right about stuff but I am slowly putting pieces of the puzzle together. This is nessary for me to grow as a individual.

Anyway here is the first thing I want to share here it's something people can make to see how your vibrations look like for example chanting mantras.
https://youtu.be/XTsjMCOTMWw

I already build some of them but I used a audio speaker and played HPS Maxine's voice FRTR sounds to see how they look.Here is a video if someone wants to try it.
https://youtu.be/C-V1uXeyGmg

You can even use a microphone and chant and see how your own sound vibrations look like.
 
One Wire Phenomenon said:
Ok this is going to be my thread where I post about things that might or might not be relevant or important to people.

Im learning as I go and enjoying things I find and sharing it please anyone feel free to reply and help out with stuff it helps me and maybe some things will help others aswell.

I might not always be right about stuff but I am slowly putting pieces of the puzzle together. This is nessary for me to grow as a individual.

Anyway here is the first thing I want to share here it's something people can make to see how your vibrations look like for example chanting mantras.
https://youtu.be/XTsjMCOTMWw

I already build some of them but I used a audio speaker and played HPS Maxine's voice FRTR sounds to see how they look.Here is a video if someone wants to try it.
https://youtu.be/C-V1uXeyGmg

You can even use a microphone and chant and see how your own sound vibrations look like.

If you make different uniquely dedicated posts, I am more likely to read them, but if you just cram everything inside here, I will not do it. (Just how my psyche works)

Also, if your posts are too long, I am also most likely not reading them.
 
LEAVE NO STONE UNTURNED


sculptures-of-the-commagene-kingdom-nemrut-mountain-750px.jpg




PRM00680-145095977-still-1600.jpg




1606343203534.jpg



maxresdefault-1.jpg



e9d813359825b9cdbc73cbb5ae95a6b3.jpg




c1d3019149485c6e831e46b2b3d6b93a.jpg



ancient-stone-head-artifact-14034705.jpg



eca8a2426571bfedd5bce746790ceee0.jpg



6a4033909ca29760eb3a8168fd87a9de.jpg


Precision
40318683d0bf230afa3404d9c041ca21.jpg




87e04307e4b5633a9749e3e537c0b889.jpg

f56b6152c23e9470841549477dca67ea.jpg


STORY OF STONE
https://mega.nz/file/ZtNRjSrS#qsxyI2NYZ2DgptLMO77ADzO4vVsfEt4nVon30UlVl48
 
The story of stones is a book about the Ancient Chinese lore of creation and our Gods. I find it very revealing and here are some interesting parts from the story of stones that i believe can help others learn about the Chinese Ancient Civilization it's basically almost like Zacerion Sitchen's books but without the Jewish touch in it. Lol The writer goes into deep detail so it can be difficult to read but some parts are not and a SS can clearly learn from it

Here we can see that Nii-kua is (PAN)

"In this particular myth, the stone of five colors
serves as the most important instrument for retrieving the dislocated Heaven and Earth. It has come to be associated with the name of Nii-kua much more closely than the other remedies mentioned (the feet of water tortoises, and the ashes of reeds). The five colors of the stones signify the hues of five elements-earth, water, fire, metal, and wood. The balanced arrangement of the five elements provides the spatial orientation required for environmental harmony. The alchemical flavor imbued in the stones is brought to our attention in the Lieh Tzu I'J .:r, which indicates that it is the harmonious fusion of the five elements in the stones that enables Nii-kua to reestablish order.40 We should note that it is only after the smelting procedure is completed that the stones of five colors, now in their liquid substance, acquire
and assume the healing function. This healing quality of the mystic mineral in question recurs in many other myths of stone and appears to be one of its constant attributes. The heaven-bound character and the divine aura of stone are also subtly but unmistakably revealed in the text, since it is far from accidental that the goddess chooses stone rather than wood or metal to mend Heaven. In "San-huang pen-chi," Ssu-ma Chen IJ ~ A wrote of Nii-kua as ruled by "the virtue of wood."41 Nii-kua is also known as the inventor of reed pipes. 42 It seems only natural that with the aid of the ashes of reeds, the goddess of the wood principle holds the deluge in check-the vanquishing of water by the element of wood. Andrew Plaks even suggests that the ​word yin-shui "
,)t., "uncontrollable waters," finds its echo in the theme of
libidinous obsession in the Dream of the Red Chamber.43
We may suggest that a subtler correspondence
between this mythic text and the Dream can be detected in
the complementary occurrence of Niikua's two curing instruments-the stones of five colors that mend the breach of Heaven, and the ashes of reeds, the element of vegetation/wood, that curb the terrestrial floods. Wood plays a complementary role in several other legends of stone. In this particular myth, its subtle interplay with stone seems overshadowed by the intervention of the third element, that
of fire-the stones are "molded," and the reeds are burned into
ashes." Read PAN https://satanslibrary.org/666BlackSun/Satanic_Symbols.html
 
Here is something relating to Zeus from the book of stones
I believe this relates to the kundalini and where the bible stole the Noah and the ark lie like HP has explained before.
Im just guessing things so don't take my word go read the book yourself.

"Karlgren recapitulates Edouard Biot's theory that
the elaborate account of Yii's feat recorded in the Shu
Ching indicates the "scholastic endeavor to make history out of a deluge legend." 74 Moreover, he emphasizes the need to
distinguish Yii's legend from those of Kung Kung and Kun,* - common deluge legends-by recognizing the former as a systematized hero myth. The catastrophe of the flood therefore emerges not so much as the center of the myth as one of the many episodes of which a hero myth is made up. In successfully overcoming the inundations as well as many other ordeals, Yii appears larger than an ordinary flood
hero. He emerges as the quasi-divine sage-king-one of the primeval milestones of the dawning of human ego-consciousness upon the chaotic waters of the unconscious'?s By examining Yii's deluge legend in the light of
the global conception of the hero myth, we can account for the emergence of a cluster of legends that are integrated into the Yii myth proper. The first such legend that attracts our attention is the story of Yii's miraculous birth. According to Neumann's reconstruction of the archetype of the hero myth, the birth of the hero is very often attributed to a virgin. The virgin mother and the leviathan whom the hero has to vanquish during his quest constitute two dominant motifs of the hero myth,?6 We shall return to the theme of the leviathan later; let us now examine the mythological account of Yii's birth. Neumann seems to have overlooked an equally
important form of the hero's supernatural birth: the
self-procreation of the hero's father. In Greek myth, Athene was not born of a woman, but sprang from the head of Zeus. And not surprisingly, Yii was also said to be born from his father Kun, according to the following sources:
​Kun was dead for three years. His body was not putrefied. Cut open by a magical sword of Wu, it was transformed into a yellow dragon. 77 Kun was cut open by the magical sword of Wu. Hence Yii was born?8 Kun was imprisoned under Mount Yii SJ'l-why did his body not decay for three years? Kun was pregnant with Yii-how was Yii generated after all? 79
Each of these three different versions of Kun's death is pervaded by images of violence and enclosure-the cutting
open of his body in the first two legends, and the allusion to his rough imprisonment in the third. But the negative imagery of death coexists with the signs of life-the birth of Yii from his father's cleaved bosom, and the dead body's transformation into another form of existence ("yellow dragon"). Life is created through death. It takes its shape only after the ritual of mutilating the body cf the life-giver has been accomplished."
 
I don't want to cause panic but fuck this article was published in 2013. When I got my first nasal COVID test this was exactly what I was thinking they are doing. I even made a post about this somewhere on the forum.
https://taboodada.wordpress.com/2013/04/27/1110/

brainwash-1.jpg
 
There is a barrier or a 'gauntlet' that shields the worlds from one another.

General Douglas McArthur remarked to the New York Times in 1955 that “the threat comes from out there.” "The nations of the world will have to unite for the next war will be an interplanetary war."

"Just as the enemy has people who cannot see us, we cannot see them. However, they will manifest blatantly as we get closer to the climax of our cause."

Science has not progressed far enough to explain the fourth dimension. Christianity has attacked science vehemently, as there is a point where the spiritual and the scientific both meet. One will always lead to the other if allowed to advance unhindered.


The war on the fourth dimension is happening in the electromagnetic spectrum. This is where spiritual Satanism and science meet. :!:

[https://youtu.be/EzWNBmjyv7Y]
http://www.chemtrailplanet.com/Wifi.html
https://educate-yourself.org/mc/listofmcsymptoms05jun03.shtml
http://www.newworldwar.org/revolution.htm
 
One Wire Phenomenon said:
There is a barrier or a 'gauntlet' that shields the worlds from one another.

General Douglas McArthur remarked to the New York Times in 1955 that “the threat comes from out there.” "The nations of the world will have to unite for the next war will be an interplanetary war."

"Just as the enemy has people who cannot see us, we cannot see them. However, they will manifest blatantly as we get closer to the climax of our cause."

Science has not progressed far enough to explain the fourth dimension. Christianity has attacked science vehemently, as there is a point where the spiritual and the scientific both meet. One will always lead to the other if allowed to advance unhindered.


The war on the fourth dimension is happening in the electromagnetic spectrum. This is where spiritual Satanism and science meet. :!:

[https://youtu.be/EzWNBmjyv7Y]
http://www.chemtrailplanet.com/Wifi.html
https://educate-yourself.org/mc/listofmcsymptoms05jun03.shtml
http://www.newworldwar.org/revolution.htm

https://ancient-forums.com/viewtopic.php?p=316745#p316745

The post I quoted here has many links.Its all very true and I just want to show that I'm not as crazy as people might of thought and I told you my intuition is superior :lol: and I find things this was what I meant in my other thread.

It would of been nice if I had someone who can awnser some of my questions like for example say yes or no if I'm correct to say the enemies advanced technologies are the cause of the Veil or rather giveing it strength which is keeping humanity inslave.

I think these waves that we are bombarded with are directed at everyone everyday for years now. That is why it's impossible for most people see the truth or not care for the truth because if you read some of the above links you will see it's very possible to this and its been going on for years for exmple why would people act on what they feel in the moment even if it's wrong instead of doing what is right and what is truth.

What HpS Maxine wrote already proves I'm right according to me. Prove me wrong if possible please.
 
One Wire Phenomenon said:
There is a barrier or a 'gauntlet' that shields the worlds from one another.

General Douglas McArthur remarked to the New York Times in 1955 that “the threat comes from out there.” "The nations of the world will have to unite for the next war will be an interplanetary war."

"Just as the enemy has people who cannot see us, we cannot see them. However, they will manifest blatantly as we get closer to the climax of our cause."

Science has not progressed far enough to explain the fourth dimension. Christianity has attacked science vehemently, as there is a point where the spiritual and the scientific both meet. One will always lead to the other if allowed to advance unhindered.


The war on the fourth dimension is happening in the electromagnetic spectrum. This is where spiritual Satanism and science meet. :!:

[https://youtu.be/EzWNBmjyv7Y]
http://www.chemtrailplanet.com/Wifi.html
https://educate-yourself.org/mc/listofmcsymptoms05jun03.shtml
http://www.newworldwar.org/revolution.htm

Sorry to post about this here, just thought I'd say, as we had a good chat during my astral post. I wrote another post about conscious dreaming, if you're interested, read that one too. :D
 
I think this is a new video of Tom Bearden.
Its a VERY good video
https://youtu.be/0aEchisa55Q

The way he speaks of extracting energy from a vacuum Is how i imagined and tried to explain the double split experiment and the speed of light. Lol I don't think I was correct but the way I explained it back then was almost identical to what he is saying about keeping the aether open by not disturbing the dipoles.

1:35:38 people this part is true.
 
Science and spirituality meet
https://ancient-forums.com/viewtopic.php?p=314696#p314696

"Resonance can be induced electromagnetically by an infrasonic pulse generator, which can establish a link, for instance, to a person’s inner organs by resonating it in their chest area. Once this connection occurs, the power level of the generator can be increased, which would automatically transfer the energy to the person. If the power level is moderate, the person may experience pain in the chest area, or their organs may vibrate. Increasing the power level will destroy their organs"

"Resonance occurs when a connection is made between a source and a target which are vibrating at the same frequency. When this happens, the materials become joined and are said to be resonating. Once resonance has been achieved, an energy exchange takes place on the surface of the membrane of each cell. If the source of energy is more powerful, it directly impacts the targeted material resulting in a biological reaction."

This happened to me with the generator. The generator was powered by a small DC motor that was spinning a magnet inside two copper coils wrapped around a iron core when this happens the magnetic fields induces a high voltage high frequency AC current in the wires and smart me became part of the circuit. The vibration of my body and the vibration or the iron core came in resonance. It doesn't have to be infrasonic the human body has its own vibrations. Like I said the generators output doubled until I fell to the ground and the wires pulled out of my hands luckily.

See resonance
http://www.newworldwar.org/sw.htm
 
I see i find things after a while that explain some of the strange phenomena I experienced and saw. I want to add some stuff here that I can not explain yet because it will be easier for me to link them up when I find the explanation.

Recently I was doing experiments with with a multi-tone generator. I was stacking different sound waves on top of one another playing around with the frequencies amplitudes and stuff. I made a horrible type of sound that would have a starting frequency and ending one which looped over and over again depending on the time I set it too. I by accidentally turned the balance knob the wrong way around which made it VERY loud. It panicked and could not find the the balance knob again because I was not looking and faceing the front side of the amplifier I was at the back side and needed to guess where the knob was. Anyway I eventually found the knob and turned it off. This is where it got extremely weird. Every day around 5pm (the same time I did the experiment) I hear this exact same sound but I cannot tell where it is coming from its sharp and loud enough to irritate me but I cannot find its origin. It's like it's coming from my own ears but it's not at the same time. This lasted for about an week until I switched off my fridge. I haven't heard it again. This is something which makes me really wonder because I have had this fridge for a long time and never heard any abnormal sound like this before until I did that experiment.
 
Want to share a breakthrough I made usually the arc that comes off of this radiant circuit is just a small tiny blue thing smaller than the tip of a match stick. And even smaller if I don't return it to ground so this is to say the least incredible.
If people don't know anything about radiant energy then just check the video of Tom Bearden I shared in this thread.

Capture-2022-01-30-00-45-48.jpg


Capture-2022-01-30-00-44-51.jpg


Capture-2022-01-30-00-46-27.jpg


My amp reading that the whole system is pulling is 4.66A but it drops as the light gets brighter. It dropped to 0.88A when the light got bright. It does fluctuate alot but it's clear that it definitely drops the brighter the lights gets. This is a very big breakthrough for me although I bought this cheap ass multimeter so I'm not completely sure if its that accurate and because I'm creating insanely BIG electro magnetic waves with very very high frequency I'm sure it is effecting the metre in some way.
Capture-2022-01-29-15-55-54.jpg


Capture-2022-01-29-15-55-25.jpg


Here is a short clip. I could not get it as bright as the first time again because something strange happened the first time by accident and after I made adjustments I couldn't get the right frequency although everything was set exactly like it was before I don't know what was wrong because even the sound it made was different than the first time.
GIF-220129-222354.gif
 
I wonder if this could link to the gold mines in South Africa and why Henu the Great told me I should be more concerned into turning my chackras into gold. I was doing some research about nano particles and resonance and found this video https://youtu.be/5bvG-8JHcmI watch the video at the 3:08 mark. They found a cup which is over 2000 years old that is glass with gold nano particles imbedded into it. It's also known as ruby glass. The Egyptians and and all the ancient civilizations used gold for things I don't think it was just for decorating. In electro magnetic research they found these Gold nano particles absorb green light and emits red light. Here is a good article to read about it
https://onlinelibrary.wiley.com/doi/full/10.1002/advs.201900471


The gold nanocrystals were seen to act via a novel energy metabolism pathway that speeds the conversion of NADH to NAD+, a critical factor for sensing and producing energy in cells. CNM-Au8 also increased the levels of adenosine triphosphate (ATP), a small molecule used as “fuel” by cells, and turned on genes related to myelin production, “collectively resulting in functional myelin generation,” the researchers reported.
https://multiplesclerosisnewstoday.com/news-posts/2020/02/11/clene-nanomedicine-publishes-results-demonstrating-preclinical-efficacy-of-cnm-au8-gold-nanocrystals-for-remyelination-in-multiple-sclerosis-in-scientific-reports
 
This reminded me of something I posted a long time ago in the astral parasites thread. And wrote something about the Jews and that they may be the cause of all astral parasitic thought forms because of the rituals they do.


Lol here is the what I found from a book called Cimatics

"It was 1983 when I got my first glimpse into the
world of Cymatics, My introduction came via a video clip of one of the films which Dr. Jenny had made documenting some of the very experiments detailed in this volume. Even though this video was barely legible, I was immediately awestruck. I was particularly fascinated by one astonishing image of what appeared to be a snake, slowly undulating on screen, but stripped right down to its vertebrae. What was so amazing was that this was neither a reptile, nor was it even alive. What I was witnessing was a small pool of glycerin being "animated" by sound! The imaginary snake was actually light reflecting off a series of wave trains creating this delicate, flowing form in the vibrating liquid."
https://mega.nz/file/ls9VWaaS#YYb_PcefG71aN9B2fugjXRbx44uE1EEXI5wLgx3PPnY

The article below reminds me of a oil experiment I did with electricity. I saw strange shapes that looked like living creatures. I called it electronic aliens lol .It's good to know it happens with other people aswell haha seeing these things.

"In 1836, Andrew Crosse, an early pioneer and experimenter of electricity, reported to the London Electrical Society regarding the accidental spontaneous generation of Acari insects while conducting experiments on the formation of artificial crystals after being exposed to electrical current.

He wrote, "My dear Sir -- I trust that the gentlemen who compose the "Electrical Society" will not imagine that I have so long delayed answering their request, to furnish the Society through you, as its organ, with a full account of my electrical experiments, in which a certain insect made its unexpected appearance... It would be superfluous to attempt a description of these little mites, when so excellent a one has been transmitted from Paris. It seems that they are of the genus Acarus, but of a species not hitherto observed. I have had 3 separate formations of similar insects at different times, from fresh portions of the same fluid, with the same apparatus. As I considered the result of my experiment rather extraordinary, I made some of my friends acquainted with it, amongst whom were some highly scientific gentlemen, and they plainly perceived the insect in various states... on the 26th day, each figure assumed the form of a perfect insect, standing erect on a few bristles which formed its tail. Till this period I had no notion that these appearances were any other than an incipient mineral formation; but it was not until the 28th day, when I plainly perceived these little creatures move their legs, that I felt any surprise, and I must own that when this took place, I was not a little astonished... Out of about a hundred insects, not above 5 or 6 were born on the south side of the stone... I have had 3 separate formations of similar insects at different times... In the course of some months, indeed, these insects so increased, that when they were strong enough to leave their moistened birthplace, they issued out in different directions, I suppose in quest of food; but they generally huddled together under a card or piece of paper in their neighborhood, as if to avoid light and disturbance... I have not observed a formation of the insect, except on a moist and electrified surface, or under an electrified fluid."

Although the acari are not worms per se, they definitely fit the bill as being insects in the form of parasites/mites/ticks. This seems to maybe tie in with cymatics. I think the arc-hons have to do with the movement that created the duality we experience. The two poles and the oscillation or arcing between the poles is associated directly with the arcing of electricity. This could also be the secret meaning behind the freemasonic symbol of the arch(way) between two pillars (or poles). Interestingly, the word acari has as an anagram 'arcai', very close phonetically to archai, archaea and archons."

http://www.trickedbythelight.com/tbtl/As-the-Conqueror-Worm-Turns-From-Parasites-to-Paradise.html
 
One Wire Phenomenon said:
This reminded me of something I posted a long time ago in the astral parasites thread. And wrote something about the Jews and that they may be the cause of all astral parasitic thought forms because of the rituals they do.


Lol here is the what I found from a book called Cimatics

"It was 1983 when I got my first glimpse into the
world of Cymatics, My introduction came via a video clip of one of the films which Dr. Jenny had made documenting some of the very experiments detailed in this volume. Even though this video was barely legible, I was immediately awestruck. I was particularly fascinated by one astonishing image of what appeared to be a snake, slowly undulating on screen, but stripped right down to its vertebrae. What was so amazing was that this was neither a reptile, nor was it even alive. What I was witnessing was a small pool of glycerin being "animated" by sound! The imaginary snake was actually light reflecting off a series of wave trains creating this delicate, flowing form in the vibrating liquid."
https://mega.nz/file/ls9VWaaS#YYb_PcefG71aN9B2fugjXRbx44uE1EEXI5wLgx3PPnY

The article below reminds me of a oil experiment I did with electricity. I saw strange shapes that looked like living creatures. I called it electronic aliens lol .It's good to know it happens with other people aswell haha seeing these things.

"In 1836, Andrew Crosse, an early pioneer and experimenter of electricity, reported to the London Electrical Society regarding the accidental spontaneous generation of Acari insects while conducting experiments on the formation of artificial crystals after being exposed to electrical current.

He wrote, "My dear Sir -- I trust that the gentlemen who compose the "Electrical Society" will not imagine that I have so long delayed answering their request, to furnish the Society through you, as its organ, with a full account of my electrical experiments, in which a certain insect made its unexpected appearance... It would be superfluous to attempt a description of these little mites, when so excellent a one has been transmitted from Paris. It seems that they are of the genus Acarus, but of a species not hitherto observed. I have had 3 separate formations of similar insects at different times, from fresh portions of the same fluid, with the same apparatus. As I considered the result of my experiment rather extraordinary, I made some of my friends acquainted with it, amongst whom were some highly scientific gentlemen, and they plainly perceived the insect in various states... on the 26th day, each figure assumed the form of a perfect insect, standing erect on a few bristles which formed its tail. Till this period I had no notion that these appearances were any other than an incipient mineral formation; but it was not until the 28th day, when I plainly perceived these little creatures move their legs, that I felt any surprise, and I must own that when this took place, I was not a little astonished... Out of about a hundred insects, not above 5 or 6 were born on the south side of the stone... I have had 3 separate formations of similar insects at different times... In the course of some months, indeed, these insects so increased, that when they were strong enough to leave their moistened birthplace, they issued out in different directions, I suppose in quest of food; but they generally huddled together under a card or piece of paper in their neighborhood, as if to avoid light and disturbance... I have not observed a formation of the insect, except on a moist and electrified surface, or under an electrified fluid."

Although the acari are not worms per se, they definitely fit the bill as being insects in the form of parasites/mites/ticks. This seems to maybe tie in with cymatics. I think the arc-hons have to do with the movement that created the duality we experience. The two poles and the oscillation or arcing between the poles is associated directly with the arcing of electricity. This could also be the secret meaning behind the freemasonic symbol of the arch(way) between two pillars (or poles). Interestingly, the word acari has as an anagram 'arcai', very close phonetically to archai, archaea and archons."

http://www.trickedbythelight.com/tbtl/As-the-Conqueror-Worm-Turns-From-Parasites-to-Paradise.html

Holy fuck I forget about this video. It popped up from YouTube now and I just watched the first few minutes. What a coincidence back then I didn't understand these things that well but now look at the post I quoted. That actually cannot be a coincidence because why would I decide to post and remember old posts I made by coincidentally watching another video on a unrelated topic then find information in another book and link them up post the post and an hour later I find a video that explains these thing after I made up my mind it was somey else that's just weird.

https://youtu.be/0HXS5b0FtiU

Btw people may think what I'm doing is normal electricity based on that clip but it's not I will prove it later on. There are very strange things that happen that would be very difficult for a normal electrical engineer to explain and impossible for a average electrician. I have searched the internet dry for some things and still cannot find anything. I think its buried in the advanced scientific study of things that a normal person won't find because its to complicated unless one had been studying for years in this field maybe.
 
As heat increases, resistivity also increases. So a flame will increase the resistance very much and decrease the current. Also current in an inductor is not able to change instantly, so you will see it decreasing instead of instantly going to zero. This actually keeps the flame going longer because it is not able to shut off right away. Be careful of flyback voltage as the collapsing magnetic field of the secondary coil can create a very large voltage spike for an instant, and this can damage your transformer or anything else you have connected. This spike may be thousands of volts. Which if that is happening, that is probably what is powering the flame to become so bright for an instant.

You should get a good meter, like a Fluke 87 V or something like that. I know they are expensive but you can often get a used one on ebay for much cheaper.
 
Ol argedco luciftias said:
As heat increases, resistivity also increases. So a flame will increase the resistance very much and decrease the current. Also current in an inductor is not able to change instantly, so you will see it decreasing instead of instantly going to zero. This actually keeps the flame going longer because it is not able to shut off right away. Be careful of flyback voltage as the collapsing magnetic field of the secondary coil can create a very large voltage spike for an instant, and this can damage your transformer or anything else you have connected. This spike may be thousands of volts. Which if that is happening, that is probably what is powering the flame to become so bright for an instant.

You should get a good meter, like a Fluke 87 V or something like that. I know they are expensive but you can often get a used one on ebay for much cheaper.

Yes thank you. I don't use a flyback though. I start off with a small 12 V transformer and move up to a microwave transformer.From there I used a Cap connected in weird way making it literally vibrate and then connect the body of the cap using the dielectric not the terminal where it should be connected.From there I connect it to the primary side of another microwave transformer. The high voltage side it connected to the other terminal of the Cap then my secondary side(ground) of the first microwave transformer is arcing to the other terminal of the primary side of the secondary transformer or the body of the secondary.

Yes I had a fluke but it got stolen. I don't have a workshop anymore aswell or the tools I'm just improvising but yeah I'm getting back into these things and will get the right equipment later on. Thanks for replying now I know there are atleast SS who can helpe understand some things. My goal is to make it a self running device. In theory and with the measurements from a lot of experiments it should work.
And even if it doesn't at the end of the day its still would be worth it for me to try I enjoy it a lot.

I will show you a video later on with another connection made where the dielectric of the cap pushes the needle of a analog tester to almost more than half of the current im using to run the system and its very strange because it's only connected to one lead of the tester not even back to ground for me thats very weird.The return path for the current to flow seems it likes to go to anything with a lower energy state which is also stange because I don't need to plug this system into the wall either I can use a 12 battery. If I used the wall as I'm doing now it's understandable but how come a battery does this? Anyway If I touch the dielectric with my hand even while wearing shoes I get a hell of a shock and by touching any light that does not require heat to light up comes on. I can just wave my hand close to it and it comes on...

Very interesting stuff!!
 
Ol argedco luciftias said:
As heat increases, resistivity also increases. So a flame will increase the resistance very much and decrease the current. Also current in an inductor is not able to change instantly, so you will see it decreasing instead of instantly going to zero. This actually keeps the flame going longer because it is not able to shut off right away. Be careful of flyback voltage as the collapsing magnetic field of the secondary coil can create a very large voltage spike for an instant, and this can damage your transformer or anything else you have connected. This spike may be thousands of volts. Which if that is happening, that is probably what is powering the flame to become so bright for an instant.

You should get a good meter, like a Fluke 87 V or something like that. I know they are expensive but you can often get a used one on ebay for much cheaper.

Please listen to this if you have some time.
He does the same thing but just with different parts. He got resonance,I got resonance,he got up in the radio frequency,I got up in the radio frequency. He speaks about getting free electrons from the environment causeing an avalanche of electrons to knock loose,I can say the same with the dielectric effect I'm seeing. Then he converts this energy back to normal 50 to 60 cycles and charges the batteries from which he starts making it a self running device.
https://youtu.be/Mnoy2D4wuf8

All I need to do is get the right equipment the most tricky part would be to get the energy back to 60 cycles but that's that I have everything in my circuit that he has.
 
Here is the basic stuff. Just incase someone with more knowledge wants to try. I am 80% sure it can be turned into a self running device.

Capture-2022-01-31-10-51-25.jpg


Capture-2022-01-31-07-42-12.jpg
 
One Wire Phenomenon said:
Here is the basic stuff. Just incase someone with more knowledge wants to try. I am 80% sure it can be turned into a self running device.

Capture-2022-01-31-10-51-25.jpg


Capture-2022-01-31-07-42-12.jpg

Just a reminder the microwave transformer is extremely dangerous when plugged into the wall never do that!!!

IT WILL KILL YOU!!!!!!!

The capacitor should be discharged before useing it.

Nobody should use a microwave transformer or Capacitor unless they know the dangers!

You can use a 12 V transformer only it will work

I left out specific details aswell
 
According to Don Smith coils have their own specific resonance due to the fact that they have both capacitance and inductance and when you cross that on a chart you will find that a specific length of wire has its own specific frequency it will load and unload by itsself. In resonant circuits the resistivity (ohms) becomes zero therefor you are at super condutor conditions at that point. Basically what happens is your volts and amperage become equal called volts ampere reactant VAR system.You can look in any radio books and hardly any of them will give you an explanation for for that and I they do it's misleading in almost all cases. Basically what it means it your resistivity becomes zero at resonance which means you are at super condutor conditions at room temperature.

In overunity devices the rate of induction is directly related to the cycles per second. If you want to establish a reference point at 60cyles per second you square that then and if you want to see the relative possession of say 220 mega cycles, square 220 mega cycles and compare the ratio between the two squares then you got the ratio of improvement with the higher frequency so when you look at the overunity production on the graph of efficiency you see the curve here you gone from a certain level of under unity which is normal to most things. Then all of a sudden when you get up to 20 000 cycles per second and start climbing up between that and 200 000 cycles per second then suddenly the curve goes way up just above 200 000 cycles per second and it stays that way all the way.

Tesla coils operate normally below 200 000 cycles per second.

When you get up in the radio frequency you get a device which is not harmful to humans and you can handle it with millions of volts going through it an you won't have anything happen maybe except the hair on your hand raise up.You can also hold light bulbs and light them.Te reason is is that which radio frequency the electrons are running on the outside of the conductor and they do not penetrate into any dept and that's one of the reasons for the high efficiency rating. In the lower frequencys the electrons through the wire an they are bumping into things and they are not functioning very well that's called under Unity.Once they are spinning outside the wire they are free to do their own thing and they don't have anything diminishing their effectiveness.Don Smith build a device which has a certain arrangement of the grounding shunt that has the ability to communicate with the electron source which would be your grounding. The resistance three is like a dam on a large body of water and it lets the electrons through then they get caught behind this dam. The device is like a pump or like dominoes it's tripping the electron here then the electron trips the next one and a whole bunch of electrons are being tripped in all directions an each time one of those would be tripped it gives off a magnetic impulse first then when it comes back on that infinity loop it gives off an electrical impulse and this goes on perpetually the electrons are never diminished.

Whenever we talk about how we get the magnetic flux measurements we go back to the first two people. They were both trying to establish the electrical background field for the with the external influences removed and as it turns out one of them did his measurements at night and came up with a different reading it was 55 000 volts an the other one did his measurements in day and came up with the measurements of a 100 000 volts and thats per square metre of Surface area and this is above the ground with surface area removed an is the normal natural electrical charge in the air at that point. This varies in the type of day,the influence bo the sun and sun spots and a lot of other things. Somethimes those measurements goes up to 2 to 5 million volts.Per square metre of plate surface.There is enormous amount of energy so you need a device which can pump it from one source to the other.You need a capacitor or resistor connect to the ground that acts as a blocking device.You need two coils with one of them with a tunable device on it so you can stick it in the grounding end of it. The source of electrons would be coming from the earth.If the electrons are not coming from the earth they are coming from a air grounding or earth grounding.You don't need to put it in a particle geological area because there are high concentrations of negative potential in curtain areas. The different potentials make it obvious you won't be able to put a cable between the two points because a cable of any size would be vaporized whenever you grounded it.With that in mind it's obvious there is an abundance of electrons everywhere. So you don't need to be concerned about that except that fact that your devices would work a lot better. There are place where the there is about 16 trillion volts and if you put a radio station up there and ground it they would hear you throughout the universe and several other universes. Some governments have probably already done this to communicate with other worlds
 
Does someone know what this is? The tube is connected to one wire and my energy fields reacts with it that's what I think but what are those lines ?
GIF-220201-210122.gif


This one has the same effect as a Plasma bulb when people touch the glass well more or less
GIF-220127-211602.gif



This one blows my mind it's very difficult to see but do you see the spiral is standing completely still! This happens only if a make a certain connection. Notice when I close my hand it moves but look at the way it moves. Isn't that strange?
GIF-220129-225516.gif



Just to remind what these well known people had to say about about this

"If you want to find the secrets of the universe, think in terms of energy, frequency and vibration." ― Nikola Tesla

Dr. Raymond Rife said his equipment would "raise the devil" with all the radios.

Tom Bearden Said “The Creator has always given us bountiful free electrical energy, everywhere, easily and readily for the simple taking. It has only been our own blindness and folly that have prevented us from seeing and using this free energy bounty.”

Don Smith:https://youtu.be/dICbnzfY464

And our Gods show us the symbol of the ankh but the symbol of the ankh is also almost how the electron looks. An electron looks like a 8 on its side.One side is magnetic and the other is electric. The Anchor is a symbol that represents the electrons which come from the sun it symbolises that it anchors ⚓ here on earth and has been doing it for billions of years that it has accumulated so much here on earth to a point where you can measure it by looking where the light ends up in our atmosphere. The electrons of earths atmosphere are hitting against the electrons of the sun's rays therefor we have light. An electron cannot truely be diminished therefor the symbol infinity and electrons are what cause photons to emit so there is definitely a connection. Don't have to agree with me I know it also has spiritual meaning.

Hail Satan
 
One Wire Phenomenon said:
In resonant circuits the resistivity (ohms) becomes zero therefor you are at super condutor conditions at that point. Basically what happens is your volts and amperage become equal called volts ampere reactant VAR system.You can look in any radio books and hardly any of them will give you an explanation for for that and I they do it's misleading in almost all cases. Basically what it means it your resistivity becomes zero at resonance which means you are at super condutor conditions at room temperature.

This is very confused. In resonant circuits, there always is some resistance because a perfect theoretical component does not exist. In every component, there is resistance, inductance, and capacitance. This works with complex numbers, or you may call it something different in your country, with resistance being the real part and the reactance due to the inductance or capacitance being the imaginary part. And both resistance and reactance are measured in ohms.

In every resonant system there is a phase difference between the voltage and the current. In a system with more inductance, voltage leads in front of current. And in a system with more capacitance, voltage lags vehind current. But the only way they could have equal phase is if there is no complex number in the impedance and the only component of the impedance is the real part resistance, which is not a resonant circuit. But no circuit is an exact perfect resistor, or exact perfect inductor, or an exact perfect capacitor, so the phase difference will not actually be exactly 90°. All of this will be very easy for you to understand if you look at voltage and current in what I believe is called the phasor model.

main-qimg-55a7bf5b4d8310a9859047e13ce41ea0-c


Since the impedance has both real and imaginary components, there is a different name for the power dissipated in each direction. The total power dissipation is measured in VA or Volt Amps, which includes both real and imaginary components. This is why you will see the power rating on all of your transformers shows you a number in VA Volt Amps instead of saying Watts, because it is both resistance and reactance. Purely real component power dissipation is measured in Watts being dissipated due only to resistance. And the imaginary component of power dissipation, due to reactance, is measured in VAR. Var is not an acronym for anything, it is a word just like how Watt is a word.

maxresdefault.jpg

power-factor.png


In a more inductive circuit, which most things are, you are wasting all of that power needed to maintain the magnetic field of the inductor, so the actual Watts you get out of the system will always be less than the power you put into it in VA. This is a lagging power factor. But in a more capacitive circuit, the capacitor stores voltage and can give out more power if it is needed, so you are running a leading power factor and you are able to [at one instant in time] draw more power out of it than what is being put in.
 
Ol argedco luciftias said:
One Wire Phenomenon said:
In resonant circuits the resistivity (ohms) becomes zero therefor you are at super condutor conditions at that point. Basically what happens is your volts and amperage become equal called volts ampere reactant VAR system.You can look in any radio books and hardly any of them will give you an explanation for for that and I they do it's misleading in almost all cases. Basically what it means it your resistivity becomes zero at resonance which means you are at super condutor conditions at room temperature.

This is very confused. In resonant circuits, there always is some resistance because a perfect theoretical component does not exist. In every component, there is resistance, inductance, and capacitance. This works with complex numbers, or you may call it something different in your country, with resistance being the real part and the reactance due to the inductance or capacitance being the imaginary part. And both resistance and reactance are measured in ohms.

In every resonant system there is a phase difference between the voltage and the current. In a system with more inductance, voltage leads in front of current. And in a system with more capacitance, voltage lags vehind current. But the only way they could have equal phase is if there is no complex number in the impedance and the only component of the impedance is the real part resistance, which is not a resonant circuit. But no circuit is an exact perfect resistor, or exact perfect inductor, or an exact perfect capacitor, so the phase difference will not actually be exactly 90°. All of this will be very easy for you to understand if you look at voltage and current in what I believe is called the phasor model.

main-qimg-55a7bf5b4d8310a9859047e13ce41ea0-c


Since the impedance has both real and imaginary components, there is a different name for the power dissipated in each direction. The total power dissipation is measured in VA or Volt Amps, which includes both real and imaginary components. This is why you will see the power rating on all of your transformers shows you a number in VA Volt Amps instead of saying Watts, because it is both resistance and reactance. Purely real component power dissipation is measured in Watts being dissipated due only to resistance. And the imaginary component of power dissipation, due to reactance, is measured in VAR. Var is not an acronym for anything, it is a word just like how Watt is a word.

maxresdefault.jpg

power-factor.png


In a more inductive circuit, which most things are, you are wasting all of that power needed to maintain the magnetic field of the inductor, so the actual Watts you get out of the system will always be less than the power you put into it in VA. This is a lagging power factor. But in a more capacitive circuit, the capacitor stores voltage and can give out more power if it is needed, so you are running a leading power factor and you are able to [at one instant in time] draw more power out of it than what is being put in.


Well the Jewish text books won't show you how to build a overunity device will they? But Don Smith will.

Rather awnser my question about the other stuff don't try and down play me with what the text book would say. I said "according to Don not me" those are his words exactly anyway
 
Ol argedco luciftias said:
One Wire Phenomenon said:
In resonant circuits the resistivity (ohms) becomes zero therefor you are at super condutor conditions at that point. Basically what happens is your volts and amperage become equal called volts ampere reactant VAR system.You can look in any radio books and hardly any of them will give you an explanation for for that and I they do it's misleading in almost all cases. Basically what it means it your resistivity becomes zero at resonance which means you are at super condutor conditions at room temperature.

This is very confused. In resonant circuits, there always is some resistance because a perfect theoretical component does not exist. In every component, there is resistance, inductance, and capacitance. This works with complex numbers, or you may call it something different in your country, with resistance being the real part and the reactance due to the inductance or capacitance being the imaginary part. And both resistance and reactance are measured in ohms.

In every resonant system there is a phase difference between the voltage and the current. In a system with more inductance, voltage leads in front of current. And in a system with more capacitance, voltage lags vehind current. But the only way they could have equal phase is if there is no complex number in the impedance and the only component of the impedance is the real part resistance, which is not a resonant circuit. But no circuit is an exact perfect resistor, or exact perfect inductor, or an exact perfect capacitor, so the phase difference will not actually be exactly 90°. All of this will be very easy for you to understand if you look at voltage and current in what I believe is called the phasor model.

main-qimg-55a7bf5b4d8310a9859047e13ce41ea0-c


Since the impedance has both real and imaginary components, there is a different name for the power dissipated in each direction. The total power dissipation is measured in VA or Volt Amps, which includes both real and imaginary components. This is why you will see the power rating on all of your transformers shows you a number in VA Volt Amps instead of saying Watts, because it is both resistance and reactance. Purely real component power dissipation is measured in Watts being dissipated due only to resistance. And the imaginary component of power dissipation, due to reactance, is measured in VAR. Var is not an acronym for anything, it is a word just like how Watt is a word.

maxresdefault.jpg

power-factor.png


In a more inductive circuit, which most things are, you are wasting all of that power needed to maintain the magnetic field of the inductor, so the actual Watts you get out of the system will always be less than the power you put into it in VA. This is a lagging power factor. But in a more capacitive circuit, the capacitor stores voltage and can give out more power if it is needed, so you are running a leading power factor and you are able to [at one instant in time] draw more power out of it than what is being put in.

But then again thanks for sharing. Its good to know and it helps me learn and others awell
 
One Wire Phenomenon said:
Does someone know what this is? The tube is connected to one wire and my energy fields reacts with it that's what I think but what are those lines ?
GIF-220201-210122.gif

What you are seeing in those bright spots are the actual wave fronts. In the animation below, you are seeing those bright spots are the pink/grey line. Blue is electric wave, red is magnetic, and the pink/grey is the Poynting Vector or the location where the total Power of the electromagnetic wave is being directed at that moment.

BpBYC.gif



This is a very interesting demonstration of inductance. Remember that air is a dielectric material, and so is your body, so the circuit is able to magnetically couple with you and interact with you by coming close to it. It is basically the exact same thing as the experiment where you drop a magnet through a copper tube and you see that it falls very slowly. Because the magnetic field is inducing a current in the copper, and this current is producing its own magnetic field that is opposite direction to the original magnetic field, and this produces a force that pushes against the magnet and slows it down.

485_magnet_copper.gif


f675b6d48442419e2e15f9376b9dec0f_w200.gif
 
One Wire Phenomenon said:
This one blows my mind it's very difficult to see but do you see the spiral is standing completely still! This happens only if a make a certain connection. Notice when I close my hand it moves but look at the way it moves. Isn't that strange?
GIF-220129-225516.gif

This is a standing wave. I guess you have energy coming in from one end, and the other end is connected to a conductor? Inside of the bulb is a field of gas which works as a dielectric material. Then at the other end at the boundary of the dielectric and the conductor, you have a reflection where this wave is reflected backwards onto itself. So you have this standing wave where it looks like it's not moving. Then by moving your hands around it, you are slightly changing the reactive impedance of the system and changing the speed of the wave just like in the previous example, so the position of the standing wave is moved.


A great book for you to read is Field And Wave Electromagnetics 2nd edition by David Cheng. You can find it for free on Libgen. This book makes all of this stuff about waves very easy to understand, and shows you how every little piece works. I mostly mean the last chapter, chapter 8 but also some from 7.
 
Ol argedco luciftias said:
One Wire Phenomenon said:
Does someone know what this is? The tube is connected to one wire and my energy fields reacts with it that's what I think but what are those lines ?
GIF-220201-210122.gif

What you are seeing in those bright spots are the actual wave fronts. In the animation below, you are seeing those bright spots are the pink/grey line. Blue is electric wave, red is magnetic, and the pink/grey is the Poynting Vector or the location where the total Power of the electromagnetic wave is being directed at that moment.

BpBYC.gif



This is a very interesting demonstration of inductance. Remember that air is a dielectric material, and so is your body, so the circuit is able to magnetically couple with you and interact with you by coming close to it. It is basically the exact same thing as the experiment where you drop a magnet through a copper tube and you see that it falls very slowly. Because the magnetic field is inducing a current in the copper, and this current is producing its own magnetic field that is opposite direction to the original magnetic field, and this produces a force that pushes against the magnet and slows it down.

485_magnet_copper.gif


f675b6d48442419e2e15f9376b9dec0f_w200.gif

Forgive me the prev post I posted to quickly I thought you are against me and wanted to make me to look bad didn't see your reply.
 
Ol argedco luciftias said:
One Wire Phenomenon said:
This one blows my mind it's very difficult to see but do you see the spiral is standing completely still! This happens only if a make a certain connection. Notice when I close my hand it moves but look at the way it moves. Isn't that strange?
GIF-220129-225516.gif

This is a standing wave. I guess you have energy coming in from one end, and the other end is connected to a conductor? Inside of the bulb is a field of gas which works as a dielectric material. Then at the other end at the boundary of the dielectric and the conductor, you have a reflection where this wave is reflected backwards onto itself. So you have this standing wave where it looks like it's not moving. Then by moving your hands around it, you are slightly changing the reactive impedance of the system and changing the speed of the wave just like in the previous example, so the position of the standing wave is moved.


A great book for you to read is Field And Wave Electromagnetics 2nd edition by David Cheng. You can find it for free on Libgen. This book makes all of this stuff about waves very easy to understand, and shows you how every little piece works. I mostly mean the last chapter, chapter 8 but also some from 7.

No its connected to the dielectric of the capacitor and my hand on one side.

You posted all this just in time I was about to leave! Im sorry
 
Ol argedco luciftias said:
One Wire Phenomenon said:
Does someone know what this is? The tube is connected to one wire and my energy fields reacts with it that's what I think but what are those lines ?
GIF-220201-210122.gif

What you are seeing in those bright spots are the actual wave fronts. In the animation below, you are seeing those bright spots are the pink/grey line. Blue is electric wave, red is magnetic, and the pink/grey is the Poynting Vector or the location where the total Power of the electromagnetic wave is being directed at that moment.

BpBYC.gif



This is a very interesting demonstration of inductance. Remember that air is a dielectric material, and so is your body, so the circuit is able to magnetically couple with you and interact with you by coming close to it. It is basically the exact same thing as the experiment where you drop a magnet through a copper tube and you see that it falls very slowly. Because the magnetic field is inducing a current in the copper, and this current is producing its own magnetic field that is opposite direction to the original magnetic field, and this produces a force that pushes against the magnet and slows it down.

485_magnet_copper.gif


f675b6d48442419e2e15f9376b9dec0f_w200.gif

Yes I saw this before with the magnet part.

I really appreciate you replying me about this this explains a lot of things but why does this not work with a tube that is plugged into the wall?
 
Ol argedco luciftias said:
One Wire Phenomenon said:
Does someone know what this is? The tube is connected to one wire and my energy fields reacts with it that's what I think but what are those lines ?
GIF-220201-210122.gif

What you are seeing in those bright spots are the actual wave fronts. In the animation below, you are seeing those bright spots are the pink/grey line. Blue is electric wave, red is magnetic, and the pink/grey is the Poynting Vector or the location where the total Power of the electromagnetic wave is being directed at that moment.

BpBYC.gif



This is a very interesting demonstration of inductance. Remember that air is a dielectric material, and so is your body, so the circuit is able to magnetically couple with you and interact with you by coming close to it. It is basically the exact same thing as the experiment where you drop a magnet through a copper tube and you see that it falls very slowly. Because the magnetic field is inducing a current in the copper, and this current is producing its own magnetic field that is opposite direction to the original magnetic field, and this produces a force that pushes against the magnet and slows it down.

485_magnet_copper.gif


f675b6d48442419e2e15f9376b9dec0f_w200.gif

It's probably because its Radio frequency or what?
 
Ol argedco luciftias said:
One Wire Phenomenon said:
Does someone know what this is? The tube is connected to one wire and my energy fields reacts with it that's what I think but what are those lines ?
GIF-220201-210122.gif

What you are seeing in those bright spots are the actual wave fronts. In the animation below, you are seeing those bright spots are the pink/grey line. Blue is electric wave, red is magnetic, and the pink/grey is the Poynting Vector or the location where the total Power of the electromagnetic wave is being directed at that moment.

BpBYC.gif



This is a very interesting demonstration of inductance. Remember that air is a dielectric material, and so is your body, so the circuit is able to magnetically couple with you and interact with you by coming close to it. It is basically the exact same thing as the experiment where you drop a magnet through a copper tube and you see that it falls very slowly. Because the magnetic field is inducing a current in the copper, and this current is producing its own magnetic field that is opposite direction to the original magnetic field, and this produces a force that pushes against the magnet and slows it down.

485_magnet_copper.gif


f675b6d48442419e2e15f9376b9dec0f_w200.gif
Is the dielectric of my body a part of my aura field,it has to be right?
 
Ol argedco luciftias said:
One Wire Phenomenon said:
In resonant circuits the resistivity (ohms) becomes zero therefor you are at super condutor conditions at that point. Basically what happens is your volts and amperage become equal called volts ampere reactant VAR system.You can look in any radio books and hardly any of them will give you an explanation for for that and I they do it's misleading in almost all cases. Basically what it means it your resistivity becomes zero at resonance which means you are at super condutor conditions at room temperature.

This is very confused. In resonant circuits, there always is some resistance because a perfect theoretical component does not exist. In every component, there is resistance, inductance, and capacitance. This works with complex numbers, or you may call it something different in your country, with resistance being the real part and the reactance due to the inductance or capacitance being the imaginary part. And both resistance and reactance are measured in ohms.

In every resonant system there is a phase difference between the voltage and the current. In a system with more inductance, voltage leads in front of current. And in a system with more capacitance, voltage lags vehind current. But the only way they could have equal phase is if there is no complex number in the impedance and the only component of the impedance is the real part resistance, which is not a resonant circuit. But no circuit is an exact perfect resistor, or exact perfect inductor, or an exact perfect capacitor, so the phase difference will not actually be exactly 90°. All of this will be very easy for you to understand if you look at voltage and current in what I believe is called the phasor model.

main-qimg-55a7bf5b4d8310a9859047e13ce41ea0-c


Since the impedance has both real and imaginary components, there is a different name for the power dissipated in each direction. The total power dissipation is measured in VA or Volt Amps, which includes both real and imaginary components. This is why you will see the power rating on all of your transformers shows you a number in VA Volt Amps instead of saying Watts, because it is both resistance and reactance. Purely real component power dissipation is measured in Watts being dissipated due only to resistance. And the imaginary component of power dissipation, due to reactance, is measured in VAR. Var is not an acronym for anything, it is a word just like how Watt is a word.

maxresdefault.jpg

power-factor.png


In a more inductive circuit, which most things are, you are wasting all of that power needed to maintain the magnetic field of the inductor, so the actual Watts you get out of the system will always be less than the power you put into it in VA. This is a lagging power factor. But in a more capacitive circuit, the capacitor stores voltage and can give out more power if it is needed, so you are running a leading power factor and you are able to [at one instant in time] draw more power out of it than what is being put in.

Here is a interested video about quantum locking. If you want to see it
https://youtu.be/8GY4m022tgo
 
Ol argedco luciftias said:
One Wire Phenomenon said:
This one blows my mind it's very difficult to see but do you see the spiral is standing completely still! This happens only if a make a certain connection. Notice when I close my hand it moves but look at the way it moves. Isn't that strange?
GIF-220129-225516.gif

This is a standing wave. I guess you have energy coming in from one end, and the other end is connected to a conductor? Inside of the bulb is a field of gas which works as a dielectric material. Then at the other end at the boundary of the dielectric and the conductor, you have a reflection where this wave is reflected backwards onto itself. So you have this standing wave where it looks like it's not moving. Then by moving your hands around it, you are slightly changing the reactive impedance of the system and changing the speed of the wave just like in the previous example, so the position of the standing wave is moved.


A great book for you to read is Field And Wave Electromagnetics 2nd edition by David Cheng. You can find it for free on Libgen. This book makes all of this stuff about waves very easy to understand, and shows you how every little piece works. I mostly mean the last chapter, chapter 8 but also some from 7.

Is this the right one?
https://mega.nz/file/ZwlA3bJB#ShgKVSGi0f9I0jxOqUQdHENeJ7AySRl5nzVF9Xp35aI
 
Ol argedco luciftias said:
One Wire Phenomenon said:
This one blows my mind it's very difficult to see but do you see the spiral is standing completely still! This happens only if a make a certain connection. Notice when I close my hand it moves but look at the way it moves. Isn't that strange?
GIF-220129-225516.gif

This is a standing wave. I guess you have energy coming in from one end, and the other end is connected to a conductor? Inside of the bulb is a field of gas which works as a dielectric material. Then at the other end at the boundary of the dielectric and the conductor, you have a reflection where this wave is reflected backwards onto itself. So you have this standing wave where it looks like it's not moving. Then by moving your hands around it, you are slightly changing the reactive impedance of the system and changing the speed of the wave just like in the previous example, so the position of the standing wave is moved.


A great book for you to read is Field And Wave Electromagnetics 2nd edition by David Cheng. You can find it for free on Libgen. This book makes all of this stuff about waves very easy to understand, and shows you how every little piece works. I mostly mean the last chapter, chapter 8 but also some from 7.

I actually for forgot how I did this. I think i had the one end of the bulb on the caps body and with my other hand the signal wire.

I will see if I can get it right again an then I will tell you

I will see
 
https://altered-states.net/barry/Lakhovsky/bioelectric.htm

https://altered-states.net/lmwo/lmwo.htm

I just want to share this link I found its a massive website and very interesting stuff!

Im going to be quiet for a while and focus on translations.
 
bfb70ee0112fb4b4c08cb7a7c269b7ec.jpg


https://youtu.be/3sYjGk2VqCA

https://youtu.be/DrbbCpOkEBg?list=PLtCd8rWmiM_4Wi9kWJDsmXTyGBAcoyRNW

https://youtu.be/2afyRNqcr-Q?list=PLtCd8rWmiM_4Wi9kWJDsmXTyGBAcoyRN
I now know what inspired the Ghost buster movies
 
Ol argedco luciftias said:
One Wire Phenomenon said:
This one blows my mind it's very difficult to see but do you see the spiral is standing completely still! This happens only if a make a certain connection. Notice when I close my hand it moves but look at the way it moves. Isn't that strange?
GIF-220129-225516.gif

This is a standing wave. I guess you have energy coming in from one end, and the other end is connected to a conductor? Inside of the bulb is a field of gas which works as a dielectric material. Then at the other end at the boundary of the dielectric and the conductor, you have a reflection where this wave is reflected backwards onto itself. So you have this standing wave where it looks like it's not moving. Then by moving your hands around it, you are slightly changing the reactive impedance of the system and changing the speed of the wave just like in the previous example, so the position of the standing wave is moved.


A great book for you to read is Field And Wave Electromagnetics 2nd edition by David Cheng. You can find it for free on Libgen. This book makes all of this stuff about waves very easy to understand, and shows you how every little piece works. I mostly mean the last chapter, chapter 8 but also some from 7.
Here is a better view and its done with one wire the HV one. It's shows up only when I hold it.
GIF-220206-115446.gif


I once asked this Master Ivo if this was a standing wave and he said no. He said that it was moving at such a high rate of speed that the human eye cannot see it.
https://youtu.be/M1oRfCLY3QM

To be honest I don't see any of these examples that explains this wave can you point me to the right one?
https://en.m.wikipedia.org/wiki/Standing_wave
 

Al Jilwah: Chapter IV

"It is my desire that all my followers unite in a bond of unity, lest those who are without prevail against them." - Satan

Back
Top